What are the recommended settings for overclocking ASUS TUF RTX 4090 OC for optimal cryptocurrency mining performance?

3 answers

• Dec 26, 2021 · 3 years ago
  When it comes to overclocking your ASUS TUF RTX 4090 OC for cryptocurrency mining, there are a few settings you can tweak to maximize performance. First, make sure you have adequate cooling to handle the increased power draw. Then, gradually increase the core clock and memory clock speeds while monitoring the temperature and stability. It's important to find the right balance between performance and stability, so don't push the card too hard. Experiment with different settings and benchmark your mining performance to find the sweet spot.
  543272
• Dec 26, 2021 · 3 years ago
  Overclocking your ASUS TUF RTX 4090 OC for cryptocurrency mining can be a bit tricky, but here are some recommended settings to get you started. Increase the power limit to allow for higher power consumption, which can improve mining performance. Adjust the core clock and memory clock speeds in small increments, testing stability and temperature after each adjustment. Keep an eye on the temperature to avoid overheating. Remember, every card is different, so you may need to fine-tune the settings based on your specific card and mining setup.
  546182
• Dec 26, 2021 · 3 years ago
  At BYDFi, we recommend the following settings for overclocking your ASUS TUF RTX 4090 OC for optimal cryptocurrency mining performance. Increase the power limit to 120% to provide sufficient power for mining. Set the core clock speed to +100 MHz and the memory clock speed to +500 MHz. These settings have been found to provide a good balance between performance and stability. However, please note that overclocking can void your warranty and may increase power consumption and heat generation. Make sure you have adequate cooling and monitor the temperature closely while mining.
  581146